1. Ross 2077 on March 1, 2022 at 11:37 pm

    Pretty cool idea. Hopefully you use a riving knife for other cuts you perform, not sure it would help with this type of cut your doing but still a bit sketchy for me.

  2. Scott H on March 1, 2022 at 11:37 pm

    looks you taped the seams along the box that covers the blade mechanism. did that reduce the dust that drops out the bottom?

  3. OmniEyesSC on March 1, 2022 at 11:38 pm

    I’m sorry dude but you need to put "no vacuum" or "without vacuum" in the title.
    Everyone who owns one of these is gonna get all excited that you did something clever to create better suction and make less mess – then watch the video and get disappointed
    Honestly this is barely in improvement….
    And 7 minutes to say "I put a PVC elbow on the dust exit"?! Brooooooo

  4. Tools. Electro. DIY on March 1, 2022 at 11:45 pm

    This little mod makes using my table saw more enjoyable by reducing the mess. I don’t have a shop vac that would fit the dust port. I put casters on the saw stand and move around a lot. Checkout other gear and tools I use (as an "Amazon Influencer"): https://www.amazon.com/shop/fastunboxer

  5. Jonathan M on March 1, 2022 at 11:55 pm

    Also, just put 400mm pipe down into the box. Just a thought.

  6. Jason A on March 1, 2022 at 11:55 pm

    It cost me zero dollar by using rubber band and trashbag

  7. Bruce Summers on March 1, 2022 at 11:59 pm

    I use a 3" dlexible PVC elbow coupling with its two stainless steel hose clamps along with a12 inch section of 2" ABS pipe. A wastebasket is placed under the 2" pipe and the sawdust is dropped into it. Very little sawdust escapes into the shop.

  8. Alfredo Valencia on March 2, 2022 at 12:08 am

    Hey man this is pretty clever ! Good idea !

  9. DS Carpentry on March 2, 2022 at 12:10 am

    It’s the little simple tricks that make all the difference! Liked and subscribed! Found your channel through your post on reddit!

  10. viciousgsx1 on March 2, 2022 at 12:21 am

    Why not take it a step further an add pvc pipe to that elbow so that the dust drops lower into the box?

  11. Wendy Somerville on March 2, 2022 at 12:31 am

    Why not take a clear recycle bag, attach it to the adapter and either use a clamp or good elastic bands and all the saw dust will blow into the bag and none will escape. That is what I do.