ALWAYS Dead Straight Cuts with your Jigsaw! | Most Helpful Wood Working Tools – Woodworking Tips #4
ALWAYS Dead Straight Cuts with your Jigsaw! | Most Helpful Wood Working Tools – Woodworking Tips #4
Get your hands on my handcrafted Merch over on https://stemerch.eu/ to support the channel! 🙂
More #Shorts: https://youtube.com/playlist?list=PLDiFNs5RB3AVrLe_hlWVuUi_xrXtyETtg
If you’ve ever used a jigsaw before, you might be familiar with the fact that it’s notoriously difficult to perfectly cut along a straight line. But there is an easy way to do dead straight cuts, that doesn’t require a lot of practice at all! Mark the start and end points of your cut, that you would normally connect using a straight line. Now take your jigsaw and place the blade right where you would cut into the wood. Now take a piece of wood that is perfectly straight and clamp it to the board you want to cut, touching the metal frame surrounding the bottom of your jigsaw. Repeat the same process on the other side Now start cutting with your jigsaw along the clamped piece of wood using it as a guiding fence. Make sure to always apply a slight pressure towards the track though, to really keep the saw on track! This trick works perfectly for circular saws too btw 🙂
Follow these easy steps to really step up your woodworking game!
Help me create more free content! =)
https://www.patreon.com/mathable
Merch :v – https://teespring.com/de/stores/papaflammy
https://shop.spreadshirt.de/papaflammy
Main Channel: https://www.youtube.com/channel/UCtAIs1VCQrymlAnw3mGonhw
My Website: https://www.papaflammy.engineer/
Flammy’s subreddit: https://www.reddit.com/r/FlammyBois
Twitter: https://twitter.com/FlammableMaths
Facebook: https://www.facebook.com/flammablemaths/
Got some time to spare? Make sure to add captions to my videos! =) http://www.youtube.com/timedtext_cs_panel?c=UCPctvztDTC3qYa2amc8eTrg&tab=2
Get a new blade problem solved
…..
*_Thanks for watching fellas <3 Hope this video was helpful to some of you! :3 Make sure to check out today’s relevant links to support the channel!_* Get your hands on my handcrafted Merch over on https://stemerch.eu/ to support the channel! 🙂
More #Shorts: https://youtube.com/playlist?list=PLDiFNs5RB3AVrLe_hlWVuUi_xrXtyETtg
Oh my God, I’ve been watching you for years but I haven’t yet checked out your woodworking channel. And now you just show up in my reccomendet shorts.
God wants me to subscribe Papa, so I did
Лобзик не предназначен для прямых резов
If you’re going to go through the trouble why not use a circular saw?
WTF you using a jig saw for circular saw job….
Awesome tip 😎 thank you 🙏🏽😎
A professional would have the right saw… if the quack you hired busts this out, your gonna get what you paid for
Using a jig… for a jigsaw?
Judieie
Nice job
This has been around since power saws have been around. That said not everyone has worked in construction as is obvious by some "projects" I’ve seen. Look at the bench I’ve made and you did not have the hard heart to tell them it’s a dogs dinner.
Nice
So… we present a one problem, and then we offer a solution to a different problem…
Okay 👌 🆗️
A quality level will work as a straight edge of you can’t find a scrap with a straight edge.
You need to find another job!
Turn the jig saw backwards for accuracy when clamping
Ok, but where from I have to take a perfectly flat surface? Flatlandia is okay to use?
Sed liufe
papa flammy goes burrrrrrr burrrrrrrr
……
Chads only cut wood with compass and ruler!
Step 4, pray your blade doesn’t flex.
.
But what if I want to do a straight cut in spherical geometry🤔🤔🤔
Or don’t use a jig saw , use a circular saw
Or if using a jigsaw don’t use the cheap and nasties Or budget ones
Interesting