DON'T build BARN Doors UNTIL you watch this VIDEO…EASY BARN DOORS
DON'T build BARN Doors UNTIL you watch this VIDEO…EASY BARN DOORS
Building in place is the easiest way to build barn doors. Closing in a pole barn with custom doors.
https://www.youtube.com/watch?v=FmXl_37a-Nk&list=PL-eb85NLna_1rrRq5MGpoHx0lBudeianx
I like your video the 2nd time I watch .I was wondering where did you buy these hinges from
How would you lock them
Very useful video. I think I would prefer to use a handsaw for those two last cuts, though, for total control.
Brilliant! Are you available next Saturday to come to Minnesota?
Nice Job! Hey, where can I purchase those type of hinges, Tractor Supply?
Brilliant! Thank you👍🏻
My wife wants me to do this exact style door. Could you possibly share the material list with me? Im doing an 8×8 but dividing it into two 4×8 size doors
Excellent! I now have a plan!
can the 2×6 and 2×4 bracing be put on the inside with the siding on the outside ?
Thank you for the video, love the doors but the gaps are a little large for my liking. 👍
Dear Sir,
Awesome video! Much better way to make a door! Do you think it would be possible to make 2 six foot wide doors if the hardware and support poles are strong enough? I want to be able to drive a bobcat into my goat shed for scooping poop and hay. Thank you
Where can these hinges be bought ?
slick as hell. thanks so much subbed. where did you get the hinges? Thanks
Love the video, need to rebuild my pole barn doors. Where can I get those door hinges?
maybe i try carriage bolt usually i go lag with cable turnbuckle otherwise same as you
thank you Sir as i used your idea for my shed and the doors are perfect .
Nice job young man thank you for your videos
I have to thank you for this. I’m currently replacing a barn door that fell off after a powerful gust of wind forced it into the doorway and wrenched the top pintle out of the upright. One slight difference: our barn doors are over 12′ high and 13′ across, with 3 horizontals and iron-mongery 5′ long. I’d no idea how to go about it until I watched this. The right-hand door is still OK (for a wooden door probably 70 – 100 years old) so I’m screwing my horizontals to it (wedged underneath to stop it sagging) rather than going all the way across, and I’m using hoists and a safety line, but my method is otherwise the same as yours.
Thank you very much! Another 70 mph gust through the open doorway would probably have destroyed the roof, so our barn says thanks too.
Amazing process you’ve shown. This is excellent information for a Novice like me who is needing to build double doors for my newly constructed Greenhouse. I wanted to do them myself but have been hugely intimidated by the task. This is absolutely what I needed to see. Thanks for sharing!!!
Great idea but the only thing I didn’t like is the gaps. It be alright for an animal shed but I’m looking for a workshop/ garage. Wanna keep the wind and people looking to loot out.
I have no idea how I never thought of this. It is so obvious and so simple. So much easier than what I’ve done before. It took just a couple minutes for it to all click. Never stop learning!
fantastic video thank you
My posts are 6×6. Can I find hinges for that size? Where do you find the hinges? Thanks.
Thank you for this video!!! Following your build-in-place method, just completed hinged carriage doors for my basement, for a 9 x 7 opening. They’re made from 4 old hollow core doors. Very pleased. And yes, they do indeed open and close 🤣!
Thank you and why dont the hinges on the left garage doors line up with the hinges you built on the right?
Well good morning I followed your directions and your door works as great as you said we were a little apprehensive but when I cut it loose the door did not budge it stayed in place and I’m very happy to say I have a barn door that is second to none thank you so much for your video please continue to educate others this was simple and basically a one-man operation
Awesome! Thank you!
I’m curious how you finished the 1 inch gap between the doors.
*I love the thurough collection of information on building a tiny house **shedplans.work** the does and don’t will help keep from learning the hard way.*
Grease your hinges before you hang your 2×6 onto your hinges next time.
What type of boards did you use? also would like to see completed and boxed in.
I have enjoyed watching your video. The barn doors were made two years ago. Today is July 14, 2022. I am wondering how they are holding up. Has there been any sagging and what corrrective action did you use?
👍
Love the video, been throwing ideas around how to build doors for an older building I am renovating. May I ask your opinion wondering adding a third 2X6 and hinge or would a third be overkill? My door opening will be around 10 foot wide by 8 foot high. Thanks for your videos, I enjoy and appreciate them.
Very good video! do you mind listing the materials you used? because I need to make one and honestly I have no idea of the type of wood, etc. Thank you!
Thank you so much for making this video. I made barn doors for my garage based on your work. I could not have done it without this video. You should have been a shop teacher! Thanks again!
My doors are 12 feet high. 2 or 3 pairs of hinges? Again, thanks!
Bloomin’ brilliant. I’ll build my doors for my new lean-to with this pattern/concept. You’re also a fine instructor. Thanks much.
Perfect. Just built these today on an old shed thanks to this video. Feel like a pro!
Smartest thing I’ve seen today. Building one big door and cutting it in half ensures everything works properly AND saves a tremendous amount of work. Mind blown.
I completed this project in 5.5 hours start to finish. I have to say I was skeptical, but wow did you deliver. Thank you for posting this valuable know how. Seriously thank you. Did it all for about $240.00 at Home Depot, way better than spending $600+ for some tacky basic garage door
this is brilliant never saw anyone do this before thank you
Super cool and informative video!!
I know this is a old video but did the hinge set come with those bolts,nuts and washers?
is this a barn door?
Great video easy to understand and doable by myself. My shed needs new doors and this is the method I will use. Thank you for a no nonsense video!
Do you see any reason why I couldn’t use 12" black extra heavy duty tee hinges? I’m putting barn doors on a garage and like the cosmetics of these hinges better. Plus, I want to get the doors as close as possible to the sides of the garage (without gaps on the sides). Thanks in advance!
where can i find these hinges? i cant find any that are like these specifically
video was fantastic !!😀
this is how i made my first set of barn doors. I didnt know it was a thing haha, few years later im watching to see if i can pick up new tricks, i enjoyed the video. work smarter not harder
Genius 👍🇬🇧