16 Comments

  1. Brady Tharp on October 3, 2023 at 8:45 pm

    The first thing you did was measure half the thickness of the wood to set the saw…



  2. Beantown Bushcraft on October 3, 2023 at 8:47 pm

    Nice tip, Thanks🇺🇸🤝🏻☘️



  3. Silverback’s World . on October 3, 2023 at 8:48 pm

    Top man



  4. BrainFizz on October 3, 2023 at 8:49 pm

    Step 1: measure the height of the blade to half the height of the timber…..🤦‍♂️



  5. Research and Build on October 3, 2023 at 8:56 pm

    I think my saw vibrates and the blade drops or raises a little bit while cutting, I’ll set it to be perfect but then later on, my laps will still be offset incorrectly . Ugh. This I think is one of the most painful joints to make even though it looks so easy



  6. BeardedVikingWoodWorks on October 3, 2023 at 9:00 pm

    Very nice



  7. Louie Valenzuela on October 3, 2023 at 9:01 pm

    I think you forgot to say , NOT!!!!!



  8. Tioga Fretworks on October 3, 2023 at 9:06 pm

    Looks a little loose to me JKM😂



  9. Gumecindo Garcia on October 3, 2023 at 9:07 pm

    The saw blade naturally adjust to the correct depth, awesome. Much less all the other tablesaw accessories and the figuring for the joint location. If you don’t have the skills buy something rustic at a Hill Country western shop



  10. Just a weeb on October 3, 2023 at 9:08 pm

    Amazing



  11. Drew Moffit on October 3, 2023 at 9:17 pm

    Thank you my lord and savior JKM



  12. Voltechs on October 3, 2023 at 9:19 pm

    Jimmy Kimmel’s brother is into woodworking?!



  13. Brock Davies on October 3, 2023 at 9:28 pm

    I’m pretty sure, after being promised there was no measuring involved, step one was to… measure something! 🤦‍♂️😵‍💫🫥



  14. John Bell on October 3, 2023 at 9:29 pm

    😮🎉



  15. matthew ortiz on October 3, 2023 at 9:33 pm

    Great tip.



  16. Dom Dom Alakazam on October 3, 2023 at 9:34 pm

    What about kerfmaker ? It’s easy to do and not taking long to do it.