Hands down the BEST TOOL EVER for REMODELS!!!

Hands down the BEST TOOL EVER for REMODELS!!!

Sure you can remodel without one…but you won’t want to after you have one!!!




Here is the link:
DISCLAIMER: As an Amazon Associate I make a small commission from purchases through these links. Thank you for the support!!!!
Drywall saw: https://amzn.to/3fitcyx
Multitool: https://amzn.to/335MX7v

50 Comments

  1. elmesane on February 16, 2023 at 5:16 am

    Try the job max out



  2. PROTOMAN247 on February 16, 2023 at 5:17 am

    I seriously hate that god awful bag pipes giecko ad 🀬



  3. Fictitious Character on February 16, 2023 at 5:19 am

    An electrician and plumber cutting out any hole square and to the studs sounds like a fairy tale.



  4. Paul Liversidge on February 16, 2023 at 5:21 am

    I bought one after this video and just used it on a kitchen remodel on the walls and ceiling. So much time saved, nice straight lines to butt my new pieces of drywall to, no punctured vapour barrier to patch up, and very little dust. I didn’t even know they existed.



  5. Mira Frenkel on February 16, 2023 at 5:22 am

    Oh my God, even though I don’t have one of these I’m just reminded of how much I struggled to cut some basic stuff out with a hand saw when I first started renovating my house. I upgraded to a reciprocating saw and tried to be as careful as possible to not let the blade go in too deep but this looks so much better! Especially since you can plunge it easily.



  6. Crazylalalalala on February 16, 2023 at 5:22 am

    has anyone worked with those 4.5 in circular saws for this application? this tool is like 200 bucks a small saw can go for as little as 50



  7. Matteus Clement on February 16, 2023 at 5:23 am

    PS – dewalt 20v vaccum with this (+ HEPA filter) is epic



  8. -AGENT- 47- on February 16, 2023 at 5:26 am

    Best tool short of level 5 smoothing knifes



  9. Dienekes on February 16, 2023 at 5:26 am

    I was kind of amazed at how little dust it generated, even without hooking it up to a shop vac.



  10. Mike Reyes on February 16, 2023 at 5:26 am

    I’m an electrician and i bought this about a year ago. my thinking was, if I’m installing a new ceiling fan with no existing fixture, instead of cutting multiple holes at every stud, then notching the wood, staple the wire and patch all the holes we made.. I’d just use this amazing tool to perfectly cut a 16"piece straight across the ceiling then down to the light switch. so i front have to deal with the fishing wire bs or using fish sticks or any other method that ends in me punching more holes in the wall than i needed. THE ONLY problem is, this tool doesn’t cut to the edge. sand it totally defeats the purpose cuz I’d have to whip out all the tools i just mentioned i was trying to ditch. womp womp. guess I’ll keep an eye out for the 2.0 versions that fixes this issue



  11. ben on February 16, 2023 at 5:27 am

    oscillator



  12. TheCalgaryPainter on February 16, 2023 at 5:28 am

    I could have used that tool on a recent job where i had to fill in 6 pot -light holes! The drywall dust made a mess when cutting. Thanks BTW for the tips on taping/mudding. They came in handy although finishing a ceiling is a lot more difficult than doing a wall repair. You make it look easy.

    I’m heavily into the Milwaukee ecosystem of tools where I have several 5.0 18V batteries. I wish they made a similar tool. The Makita drywall saw costs over $200 CAD without the battery and charger. If I was doing reno’s full-time I’d certainly get it!



  13. rick columbo on February 16, 2023 at 5:28 am

    A vibrator does the same thing and has other uses



  14. Drew on February 16, 2023 at 5:30 am

    Makita brand is the one and only



  15. Bruce Moore on February 16, 2023 at 5:31 am

    Ben, what happened to your thumb. Could you explain in your next vlog? Hope it heals fast. Thanks, Bruce.



  16. Bill Petersen on February 16, 2023 at 5:31 am

    Depth adjustment? 1/2” and 5/8”



  17. George Obama-Biden on February 16, 2023 at 5:31 am

    Is this any good for plaster, young benny boy?



  18. D Lighted on February 16, 2023 at 5:37 am

    Grueling and excruciating? Wuss much? πŸ™„



  19. Michael S on February 16, 2023 at 5:37 am

    4" hole saw on my drill is by far my easiest way to go. Cut out a 4" California patch when finished, and drywall is fixed quickly with no tape or backer plate.



  20. jim yeats on February 16, 2023 at 5:38 am

    Seems like it would be much more comfortable with the handle/grip at a more parallel angle to the plate that rests against the drywall.



  21. Travis k on February 16, 2023 at 5:38 am

    Been playing vcc on auto play for 2 days straight. Got them playing at 1.5 speed and am on video #94, this one, right now. I have them playing in the background, upping vcc viewership.



  22. Jon K on February 16, 2023 at 5:38 am

    i may have to get one, seems like a better idea than a circular saw with the blade put down a hair over 1/2"



  23. -AGENT- 47- on February 16, 2023 at 5:38 am

    Best tool I own for drywall….. it’s professional 90Β° cut.. like factory cuts



  24. Emmanuelle Allen on February 16, 2023 at 5:38 am

    This is actually a jigsaw with a shorter blade



  25. Tacit knowledge on February 16, 2023 at 5:41 am

    i just crossed my mind instead of this why wouldn’t they just make a special dry wall blade for a jig saw lol cause then the could only charge you 25 instead of 250 lol



  26. David S on February 16, 2023 at 5:41 am

    The saw looks great. You can always set the blade for just shy of the full width of drywall and use the knife to finish off the cut if you worry about cutting into pipes or wires, yes?



  27. Lord Death on February 16, 2023 at 5:41 am

    The drywally saw is a good name



  28. Road to Tolaria on February 16, 2023 at 5:44 am

    Do the same thing by re-using old Sawzall blades that aren’t worn at the start of the blade. Grind or cut them to custom lengths for different sheet goods. In a hacksawzall it works as well as this tool and its free of you already have the hacksawzall



  29. The Original Chefboyoboy on February 16, 2023 at 5:46 am

    I was able to get one with an interchangeable skin, so I can put on a camo skin and absolutely no one but me can see it on a job site – never walks away…



  30. Jose Otero on February 16, 2023 at 5:46 am

    What type of wrist band is that.



  31. B H on February 16, 2023 at 5:49 am

    Your videos are great , keep up the good work, I learn new things every time I watch your content. I could have used this saw last week on a reno. I am going to buy one.



  32. Joe Simes on February 16, 2023 at 5:50 am

    It’s less than 200 bucks why wouldn’t you buy it???? πŸ™‚



  33. Trail Runner 619 on February 16, 2023 at 5:52 am

    It looks like a jig saw with a broken blade



  34. JS West on February 16, 2023 at 5:52 am

    Try a Quadsaw. Most better product. Cleaner cuts.



  35. t top on February 16, 2023 at 5:53 am

    I clicked on this video just to hit the like button tbhπŸ˜πŸ‘



  36. Matteus Clement on February 16, 2023 at 5:53 am

    you use the drywall saw but don’t use a collated screw gun? Please help me under stand Jedi Ben



  37. Curtis B on February 16, 2023 at 5:55 am

    So a multi-tool and a jigsaw got a little drunk one night..



  38. Bruce Le Smith on February 16, 2023 at 5:55 am

    this was a great vid thanks



  39. Steven Betts on February 16, 2023 at 5:56 am

    The oscillating multi tool changed my life. That thing is amazing for drywall I use it for that and trim exclusively.



  40. Helena Blakemore on February 16, 2023 at 5:58 am

    I have one, and absolutely love it. I even have a multi-tool with a drywall blade, but that is actually slower and more messy than this thing.



  41. Brian A on February 16, 2023 at 5:59 am

    Love this tool. When hooked up to a vac is basically dustfree. Can cut over wires and pipes without cutting them. Best drywall tool ever. I still use a rotary tool and multi-tool for various instances but this replaces 90% of what I used them for previously.



  42. Daniel Fortier on February 16, 2023 at 6:00 am

    I just renovated my whole basement and I am presently only 5 sheets of drywall away from completing my whole renovation. I wish I had known about that tool a long time ago!!! Too late for me now because in the past 7 years I’ve renovated my whole house and no longer have a need for such a tool. Too bad!



  43. Plus 8 Precision on February 16, 2023 at 6:01 am

    I prefer a vibratory multi-tool. You can see your layout lines for one. And you can get into pretty much any place. The vibratory multi-tools are the best remodeling tool to add to anyones tool box. My 2 cents worth.
    Mike – Plus8Precision



  44. Luke on February 16, 2023 at 6:03 am

    I saw this video on Friday, found out on Saturday that on Monday I was pulling down ceilings in an 8 million dollar apartment with sprinkler heads thst if disturbed could go off and flood the whole floor and elevator shaft or even the whole building, so on Sunday I went out and bought this tool and today it turned 8 hours of work into 4.

    Bit expensive for a DIYer but as a carpenter who does renovations and remodels, this is one of l the best specialised tools I’ve bought. Thanks for the recommendation.

    As others have said, a multitool would do the same job but would take 3 times as long, doesn’t have a dust catcher, and heaps more hassle. I love it.



  45. Stich on February 16, 2023 at 6:04 am

    Another for the oscillating multi tool



  46. gumby600 on February 16, 2023 at 6:04 am

    Make clean cuts in drywall! Even cutting a line with a knife then hammer smashing is an improvement.



  47. Kevin R on February 16, 2023 at 6:07 am

    Worst tool ever. I do remodeling and I don’t even bring it anymore. It doesn’t do anything. The vast majority of cuts I make in drywall is going vertically up the center of the stud. Can’t do that you’ll wreck the expensive blade. You also can’t make that cut completely because you can’t go all the way to floor or ceiling. Oh the best part about this turd is you can even see where you’re cutting. Can’t follow a line. I can use a sawzall without cutting pipes or wires. Or a multi tool depending on the situation.



  48. Vince Ferraccioli on February 16, 2023 at 6:09 am

    I have a Rockwell Multi tool I have had for years except it has a chord Love it



  49. slimcassidy on February 16, 2023 at 6:10 am

    These are great. I do restoration work strictly in hospitals and medical facilities where dust control is crucial. But We mainly use a tool called a Kett Saw, precise depth control so never hit studs, more powerful, quicker, can also zip through plaster even too and when hooked up to a hepa vac, almost zero dust.



  50. Wayne on February 16, 2023 at 6:10 am

    Man, that is a waste of cash, grab your multi tool or keep a short jig saw blade on hand with the teeth filed down. Sav your money.