1. Stiev Boyo on November 8, 2023 at 10:54 pm

    Another dangerous man showing people how to lose their fingers

  2. Motivating U2. on November 8, 2023 at 10:59 pm

    Good amazing awesome video to loose a finger great job

  3. Master Toolman on November 8, 2023 at 11:01 pm

    Always use a push stick, and a crown guard then it would be suitable for use, your hands are too close to the blade. The blade cuts flesh as well as wood.

  4. Leonard on November 8, 2023 at 11:04 pm

    Good ideas. Perhaps to further develop to more presentable form. Thank you.

  5. Steve C on November 8, 2023 at 11:15 pm

    Pushstick? We don’t need no stinkin’ pushstick!

  6. Donald Painter on November 8, 2023 at 11:16 pm

    Let’s see what you have for a router table if you have one I’ve seen several designs but haven’t built my permanent table yet would like to see anyone design

  7. An idiot, a board. on November 8, 2023 at 11:19 pm

    I bought the most recent version of that very same table saw a year ago. They have made ZERO improvements to the fence or the mitre gauge. They still absolutely suck, but it was $139, and I am so tight with my money that I’m tighter than a ducks arse. I guess I got what I paid for.😂

  8. Nats Folscher on November 8, 2023 at 11:19 pm

    I see this is done 8 years ago….sorry I am a slow reader, out of all the videos I looked at to make a bigger "table" yours are on top of all. 😂. Just want to know after all these years did you replace it or is it still going? The table part nor the saw, as I know if they work everyday they tend to stop working, to force you to buy a new one….think they call it "the principles of keep the economy going" 😂 big shout out and thanks for the video. And videos or idea of a router table? Might use the same concept as my router table is just ad flimsy and crap😮

  9. Donald Painter on November 8, 2023 at 11:21 pm

    I built a table that my saw sits into this takes away from what thickness of wood you can cut my way isn’t portable but I can run full sheets of plywood with no problem and my fence is made so I can use different jigs like panel jigs mortise and tenet I’ve made a jig for everything took a hundrrd dollar saw turnef it into a proffesinal saw

  10. Mike Miller on November 8, 2023 at 11:22 pm

    What did you cut the pieces on, we’re wondering how to do this without anything else as a say that’s straight to do this.

  11. Donald Painter on November 8, 2023 at 11:23 pm

    I even bought another saw and built a table just for dados nothing else that saves a lot of time I’m just a part time woodworker but in a couple years I’m considering retiring and do it full time if so I’ll have everything set up for easy fast work

  12. MIGUEL SEMIDEI on November 8, 2023 at 11:28 pm

    Wax the wood for a smoother feel.

  13. Ted Ted on November 8, 2023 at 11:33 pm

    Great video,I’m gonna do that with my cheap saw.

  14. Ted Ted on November 8, 2023 at 11:40 pm

    How’s he got all his fingers…??

  15. Gail Johnson on November 8, 2023 at 11:47 pm

    Hi, so when do it like this you don’t need kickback guard

  16. GrimCarrey on November 8, 2023 at 11:48 pm

    pretty tight

  17. StrandYT on November 8, 2023 at 11:51 pm

    Hey way to almost saw your hand off bro.

  18. Nick Borcescu on November 8, 2023 at 11:52 pm

    How come you didn’t use aluminium L-shape angles on the edges? Something like 1/8" aluminium extrusion would help glide better, keep much straighter… etc etc. Otherwise: great idea, I have a tiny Ryobi BTS10 with an incredibly shitty fence and your idea (with some nice aluminium angles and a stick-on measurement strip) should make it become a fierce little machine! Thanks for posting!!

  19. Mason MAIN PAGE on November 8, 2023 at 11:52 pm

    20 seconds in…..not smart. lose a finger

  20. BayFire Studio on November 8, 2023 at 11:53 pm

    How does this guy still have all his fingers?

Leave a Comment