21 Comments

  1. Jon Majors on November 11, 2022 at 4:50 am

    Did you notice the speed issue when speed is set under 3?



  2. Roselyn’s Channel on November 11, 2022 at 4:52 am

    Thanks for showing how to put the blade.



  3. Jacha Uru on November 11, 2022 at 4:52 am

    This is a bad saw, its cutting progress is very slow, it is not recommended for large projects, it is special for small jobs



  4. Mixwell1983 on November 11, 2022 at 4:54 am

    Got one of these also and the best thing to do is get the Bosch mixed blade kit for metal and wood for $10..

    As with any saw cheap or pricey, a good blade makes all the difference.



  5. Joseph Leister on November 11, 2022 at 4:56 am

    Nice , seems to work well for 20 bucks…..



  6. avgyoutuber123 on November 11, 2022 at 4:57 am

    What blades would you recommend for this jigsaw the one that came with it is pretty booty



  7. Rob Z on November 11, 2022 at 4:58 am

    I got maybe a few cuts with it before the blade holder failed. Chinese quality.



  8. J.P. Jones on November 11, 2022 at 4:59 am

    I just bought one at walmart and wanted to see your review before I opened the box. thanks for the review



  9. Tammy Orton on November 11, 2022 at 5:04 am

    While trying to keep my blade in to make cuts, I found that if you push the blade harder in the slot, there is what feels to be a hard spring in there.
    The hard spring will give alittle, and the blade slips further into place.
    After doing this, my blade stayed locked in.



  10. Frances Outlaw on November 11, 2022 at 5:08 am

    Is there a guide to make straight cut like with circular saw that comes with an attachment? I need to make sure the cut is really straight for my bookbinding projects. Thanks!



  11. Dwayne Green on November 11, 2022 at 5:08 am

    Had mine for 6months and used only a couple of times before it started overheating and seizing. Had to wait for it to cool down. Maybe it’s just a bad one; I’ll be taking it back.



  12. Karly Arnold on November 11, 2022 at 5:11 am

    I just bought this saw to cut laminate flooring and the blade keeps popping out even though I hear and feel it click into place when I insert the blade. Any advice?



  13. FourDollaRacing on November 11, 2022 at 5:11 am

    Equivalent to Harbor Freight…



  14. John Cervantes on November 11, 2022 at 5:12 am

    I agree it’s cutting slow I’m sure it’s the speed it’s low but i mean it’s cutting and it’s on low so 🤷‍♂️🪚



  15. Teresa Allen on November 11, 2022 at 5:20 am

    Can this use u shank blades



  16. NAME HERE on November 11, 2022 at 5:25 am

    You have to turn the speed up..



  17. Lisa Harrison on November 11, 2022 at 5:26 am

    I just brought one from Walmart on clearance ($9.36), and no blade, but that’s not the prob. I need to cut a ⭕️ in a 1/2 “ thick piece of wood to thread my wires through it. Could you do a demo for that using the Hyper Tough 3.5-AMP? Thank you



  18. Rejane Lind on November 11, 2022 at 5:36 am

    Whay my blade doesn’t stay in



  19. Ann Marie Castillo on November 11, 2022 at 5:37 am

    I just bought mine, inserted the blade and it locked. But when I was getting ready to cut the wood it fell off at the begining of the cutting…why? can someone please help me with that?



  20. Manuel A. Huamani on November 11, 2022 at 5:38 am

    not offense but using circular saw, you may cut that panel in 5 second



  21. D Roper on November 11, 2022 at 5:38 am

    thanks for sharing