Did you know that most of your viewers can’t afford festool anything, and usually can get the same job done with Makita, Dewalt, Metabo, or Kobalt???
Flabbergastedon July 25, 2023 at 3:03 pm
I’m not sure but.. I think.. I think this guy loves Festool
DENIS PODHALYUZINon July 25, 2023 at 3:09 pm
Круто Вам, когда все есть, можно хоть ракету построить.
Cerberuson July 25, 2023 at 3:11 pm
Will work for cuttting thick slabs up to 4 and a quarter thick, the track saw will not do that.
Daddyon July 25, 2023 at 3:12 pm
Damm I’m impressed. This guy does everything so good and so easy.
He even talks effortlessly
Shaunon July 25, 2023 at 3:12 pm
Been a while now that I’ve seen you use a brand different from festool. Are you now sponsored by them ??
Александр Сon July 25, 2023 at 3:13 pm
Festool классный инструмент. 👍😊Но для меня он буржуйский.
mohamed Qoutanion July 25, 2023 at 3:15 pm
أتمنى
Logan Priceon July 25, 2023 at 3:16 pm
First time I’ve ever heard you speak my man
Alfonso Munozon July 25, 2023 at 3:18 pm
For once someone says, "I know what you’re thinking", and he’s right.
Marthyon July 25, 2023 at 3:20 pm
Soy fan de el arte de la carpintería….💝🇨🇴🇪🇦
Geller Woodworkingon July 25, 2023 at 3:20 pm
Screw up a jigsaw blade, $7-$15. Screw up a track saw blade, well, don’t wanna find out that cost.
BONK SIDEon July 25, 2023 at 3:20 pm
Мужик, я не понимаю английского языка, но твои видео лучшие!
Alonso Carrascoon July 25, 2023 at 3:23 pm
I’ve used the Makita variant for cutting insulation.
myriam ham-fouron July 25, 2023 at 3:24 pm
Merci !
Maxon July 25, 2023 at 3:24 pm
Umm that tool doesn’t make much sense, I may be missing something. If you would have to accout for the off set of the jig saw blade, why not just use the track as a straight edge and butt the jig saw’s base up against the track to make a straight cut, it would do pretty much the same with no adapter.
Carin 2on July 25, 2023 at 3:25 pm
You’re are amazing 👏 I’m from Egypt 🇪🇬
Sardor Axmedovon July 25, 2023 at 3:25 pm
Привет ви па руским знайиш
Rosen Chelebievon July 25, 2023 at 3:26 pm
The worst festool tool I ever have is the jigsaw. In just a month a little pin that keep the pendulum close to the guide got broken and the blade was shaking all over the place and it was impossible to cut in straight line . Well overpriced.
Milan Dzundaon July 25, 2023 at 3:27 pm
Not very convinced about the quality of cut, though. Yes, it would be straight, but also, since there is only a small connection between rail and jigsaw cut would be twisted and not at full 90%. A simple rail with line in the middle for blade to run through would be much better 😉
Robert Weisson July 25, 2023 at 3:31 pm
Yeah we all learn from Watching Project Farm, that Fiesta tools are absolute junk why they cost so much I have no idea
Aaron Araujoon July 25, 2023 at 3:31 pm
homeowner’s need to understand the Festool up-charge on their invoice
Alex Montalvoon July 25, 2023 at 3:32 pm
Cool !
John Campagnaon July 25, 2023 at 3:33 pm
Yes it will !!!! Especially when you’re doing stainless steel specialty work in a kitchen or clean room!!! As a hvac mechanic , most people think you’re work is hidden in the ceiling…smh.. thanks bro!!
7osainon July 25, 2023 at 3:34 pm
🫡
Dana Shayon July 25, 2023 at 3:35 pm
Another peerless video!
Really very nicely done. Thanks for being there for us!
old king Crowon July 25, 2023 at 3:37 pm
If you don’t watch rhe visual you’d think Jordan Peterson got into a cool late life hobby.
Silly flappy headed canooks 🤣
Artur Bunaron July 25, 2023 at 3:37 pm
Dusty👍👍👍🤘
Vincent Leeon July 25, 2023 at 3:37 pm
It says it on the box…
Kit Murphyon July 25, 2023 at 3:38 pm
Will cutting metal hurt or scratch the guide track?
दानसिंग पटेलon July 25, 2023 at 3:38 pm
ओज
Аланиё Дельваресon July 25, 2023 at 3:38 pm
На русском тоже скажи да по-братски
myriam ham-fouron July 25, 2023 at 3:40 pm
GÉNIAL 👍 👍 👍 CELA PARAÎT PLUS LÉGER POUR TRAVAILLER.
tt Oxfordon July 25, 2023 at 3:42 pm
подарите мне погоужную пилу фестолл по братски🤠
magmadragon75on July 25, 2023 at 3:42 pm
A big use for this is after you plunged with the saw to get a cut out and then use this to get rid of the corners cleanly
Roland M. Dillon July 25, 2023 at 3:44 pm
Might come in handy when I need to cut sheet metal and I didnt bring my cnc water jet
An2TheAon July 25, 2023 at 3:44 pm
I mean, when I use a jigsaw, it is usually for when I need a clean cut while out of the job, so I use it upside down.
Unfortunately this won’t help unless I use the track clamps and mark on both sides. Doesn’t seem too useful for my business.
pundion July 25, 2023 at 3:46 pm
Ok
Terryon July 25, 2023 at 3:51 pm
Festool Frank!!!
Stoyan Kolevon July 25, 2023 at 3:52 pm
I’m still dreaming of owning anything that is Festool, still on the mix bag setup
Антон Киселевon July 25, 2023 at 3:54 pm
Красавчик.
SkyTech and Gizmos Martinezon July 25, 2023 at 3:54 pm
hmmmmmmmmm
Michael Fairchildon July 25, 2023 at 3:55 pm
If Ill need to cut sheet of metal I’ll take out my metal cutting circular saw.
ดีเยี่ยมเลยครับ
Did you know that most of your viewers can’t afford festool anything, and usually can get the same job done with Makita, Dewalt, Metabo, or Kobalt???
I’m not sure but.. I think.. I think this guy loves Festool
Круто Вам, когда все есть, можно хоть ракету построить.
Will work for cuttting thick slabs up to 4 and a quarter thick, the track saw will not do that.
Damm I’m impressed. This guy does everything so good and so easy.
He even talks effortlessly
Been a while now that I’ve seen you use a brand different from festool. Are you now sponsored by them ??
Festool классный инструмент. 👍😊Но для меня он буржуйский.
أتمنى
First time I’ve ever heard you speak my man
For once someone says, "I know what you’re thinking", and he’s right.
Soy fan de el arte de la carpintería….💝🇨🇴🇪🇦
Screw up a jigsaw blade, $7-$15. Screw up a track saw blade, well, don’t wanna find out that cost.
Мужик, я не понимаю английского языка, но твои видео лучшие!
I’ve used the Makita variant for cutting insulation.
Merci !
Umm that tool doesn’t make much sense, I may be missing something. If you would have to accout for the off set of the jig saw blade, why not just use the track as a straight edge and butt the jig saw’s base up against the track to make a straight cut, it would do pretty much the same with no adapter.
You’re are amazing 👏 I’m from Egypt 🇪🇬
Привет ви па руским знайиш
The worst festool tool I ever have is the jigsaw. In just a month a little pin that keep the pendulum close to the guide got broken and the blade was shaking all over the place and it was impossible to cut in straight line . Well overpriced.
Not very convinced about the quality of cut, though. Yes, it would be straight, but also, since there is only a small connection between rail and jigsaw cut would be twisted and not at full 90%. A simple rail with line in the middle for blade to run through would be much better 😉
Yeah we all learn from Watching Project Farm, that Fiesta tools are absolute junk why they cost so much I have no idea
homeowner’s need to understand the Festool up-charge on their invoice
Cool !
Yes it will !!!! Especially when you’re doing stainless steel specialty work in a kitchen or clean room!!! As a hvac mechanic , most people think you’re work is hidden in the ceiling…smh.. thanks bro!!
🫡
Another peerless video!
Really very nicely done. Thanks for being there for us!
If you don’t watch rhe visual you’d think Jordan Peterson got into a cool late life hobby.
Silly flappy headed canooks 🤣
Dusty👍👍👍🤘
It says it on the box…
Will cutting metal hurt or scratch the guide track?
ओज
На русском тоже скажи да по-братски
GÉNIAL 👍 👍 👍 CELA PARAÎT PLUS LÉGER POUR TRAVAILLER.
подарите мне погоужную пилу фестолл по братски🤠
A big use for this is after you plunged with the saw to get a cut out and then use this to get rid of the corners cleanly
Might come in handy when I need to cut sheet metal and I didnt bring my cnc water jet
I mean, when I use a jigsaw, it is usually for when I need a clean cut while out of the job, so I use it upside down.
Unfortunately this won’t help unless I use the track clamps and mark on both sides. Doesn’t seem too useful for my business.
Ok
Festool Frank!!!
I’m still dreaming of owning anything that is Festool, still on the mix bag setup
Красавчик.
hmmmmmmmmm
If Ill need to cut sheet of metal I’ll take out my metal cutting circular saw.
Thanks, nice to hear from you. 😁👍
He does talk! Well damn.
Nice
…so why not show working with metal
😍👍🙋♀️💕
wait wait wait!! you can speak ?