Must Know Jigsaw TRICK #tips #tools #construction
Must Know Jigsaw TRICK #tips #tools #construction
This is called a plunge cut. If you don’t have a drill handy this is a great way to cut into the material without cutting through the material where it doesn’t need to be cut. What do you think about this trick?
If you enjoy the content, please cinsider subscribing to the channel! Thank you!
Link:
Jigsaw- https://amzn.to/3KmMp3B
*commissionable link. Non sponsored.
Dont you have a forstner bit?
Some people have never touched a jigsaw and it shows In the comments💀😂
Fine tool and skillsaw for me.
That’s not a trick, drill a hole it works better
I just use a table for the most part. its abit faster i think. But nothing wrong with using a jig saw either.👌
The first multitool
Prosto jak ślad moczu idącego byka
*promo sm*
Ох и залупа😂😂😂
Just drill a hole 10mm does the trick, that cut was nasty af
Good skill, but there is the chance of bending or breaking a blade. If you have a drill close, pop through a half inch hole and start from there.
This is called a plunge cut. If you don’t have a drill handy this is a great way to cut into the material without cutting through the material where it doesn’t need to be cut. What do you think about this trick?
а просверлить?
Been there done that
Just heat it up a little bit and cut it with a knife
Old news
I don’t think I’d be able to find my jigsaw let alone muster the inclination to use it again, plunge with circ, clean up corners with multi
Ha it is easier to drill a hole first u don’t fool me about your hack usually this is a fine way to break blades 😅 it’s not designed for wot u are doing
Рукожоп…..
Just buy an oscillating saw. No need to lose fingers
Drill
Good tip
You forgot to say:
Don’t do this at home
If the saw break by mistake the end will not be happy eye 👀
The straightness of that cut was as straight as that guy
Impressionante!!! 😮 Só vendo mesmo pra acreditar 👍🏽
Coping saw and saw zawl combo and skilled labor reduces the need for such a gross dewalt pos
Воттакненадоделать
His hand being next to the sawblade while doing this makes me sweat 😅