Plastic or Wood – Woodworking Marker DIY [4K]

By alama | February 5, 2023 |

Plastic or Wood – Woodworking Marker DIY [4K]

I have one 3D printed “woodworking marker” that I use in my workshop. This tool has caught the attention of some of my followers. I thought I could do the same with wood. I started with a solid piece of wood. First I made it to the dimensions I wanted. I used planer and bandsaw. Then I shaped it by looking at the dimension PDF document I prepared. It is possible to use this #woodworkingmarker for 90 degree and 45 degree angles. It is also possible to make error-free markings. After you download the PDF document, you can easily do it by looking at the dimensions. I think I like the wooden one more. Which one do you prefer? The 3D printed plastic one or the wood woodworking marker?

You can find all dimensions in the pdf document.
➤PDF (dimensions-plan) download page : http://www.greensawdiy.com/woodworking-marker.html

➤Tools/Supplies Used :
Sanding Machine : https://youtu.be/lM-V20zzfjQ
Countersink Drill Bit : https://youtu.be/eVBJWfIlPWw
Spring Clamp : https://youtu.be/QHrzPgwZsSI

➤Subscribe https://www.youtube.com/greensaw/?sub_confirmation=1
➤My website : http://www.greensawdiy.com
➤Join : https://www.youtube.com/channel/UCFffS89D6ckU6ycxHulaNxg/join

➤Playlists:
DIY Tools: https://www.youtube.com/watch?v=PLZFzQVHwj15gxNMWacspqqSMlWLRkiksX
Clamps: https://www.youtube.com/watch?v=zNrEcNd5gCg&list=PLZFzQVHwj15j7wGkQX4EIEzRd7-nOeO8G
Sanders : https://www.youtube.com/watch?v=tcDLvwU7ucQ&list=PLZFzQVHwj15iczFFydOxbcMt1TIWLeeMs
Wood Turning : https://www.youtube.com/playlist?list=PLZFzQVHwj15iMT5jwkc_Sp3s1ZG-AyZkL
Drilling Tools : https://www.youtube.com/playlist?list=PLZFzQVHwj15hehBh93G6gfrGH4GBZ6emP
Wood Works : https://www.youtube.com/playlist?list=PLZFzQVHwj15jUi38AgPRs6VTjK96aa-9E
Celaning : https://www.youtube.com/watch?v=ztP-uP29IeI&list=PLZFzQVHwj15icbL6VEqXyzrPR7DD5ImZm
Band Saw : https://www.youtube.com/watch?v=rz7FJ5t9SOU&list=PLZFzQVHwj15gsCAgmzixToLgOxGggRivn

Posted in Tools

50 Comments

  1. Henrik Paulsen on February 5, 2023 at 4:22 am

    6:15 That flaw in the groove to the upper right is the reason you shouldn’t make your passes in that direction. By doing that, the bit will try to force the workpiece *away* from the fence and remove too much material, which happened here.



  2. Vinicius teixeira de carvalho on February 5, 2023 at 4:23 am

    👏👏👏👏👏👏👏👏👏👏👏👏👏👏👌👌👌👌



  3. Marcous Awad on February 5, 2023 at 4:23 am

    👌👌👌



  4. Leonardo Petreca on February 5, 2023 at 4:24 am

    Eu gostei mais o de madeira , você faz para venda ? e como faço para encomendar um egual a esse ?



  5. Gilson Souza on February 5, 2023 at 4:25 am

    Muito bom!
    Valeu!



  6. peterics on February 5, 2023 at 4:27 am

    Great greensaw



  7. MC's Creations on February 5, 2023 at 4:27 am

    Fantastic work, man! Really well done! 😃
    I just don’t know why I didn’t see this video before! 😬
    Anyway, stay safe there with your family! 🖖😊



  8. Juan Miguel Flores on February 5, 2023 at 4:27 am

    gracias



  9. Hans Bächtold on February 5, 2023 at 4:28 am

    great as ever. Thanks for the PDF👍



  10. George Saga on February 5, 2023 at 4:28 am

    Los dos son útiles no importa si es de plástico o madera, claro nada supera la satisfacción de fabricarla tu mismo



  11. carlos moura on February 5, 2023 at 4:29 am

    Muito show adoro ver seus vidios, aprendo muito, agora com legendas fica bem melhor



  12. Peter Harman on February 5, 2023 at 4:29 am

    Lovely job well done sir, it would probably be quicker to 3D print the thing but I prefer your version because 1, it’s not plastic but real wood, 2 it’s hand crafted and carefully done and lastly it looks far superior to the plastic thing 😀 👏👏👏👏👍👍👍👍



  13. Lucky Lou on February 5, 2023 at 4:30 am

    The original was made by Stanley and called the Odd Job no. 1. It was made from 1888 till the 1930s



  14. Wanpeng Qian on February 5, 2023 at 4:30 am

    a very nice build! thanks.



  15. Deomedes Ferreira Gomes Filho on February 5, 2023 at 4:30 am

    Gostei muito parabéns pela sua criatividade



  16. sofiane ben hadj on February 5, 2023 at 4:32 am

    very very good job



  17. Сергей Панкратов on February 5, 2023 at 4:35 am

    Извените ,может винтик с гаечкой поменять местами?



  18. Marcorele73 leboiseux on February 5, 2023 at 4:36 am

    I find that the wooden ones are much more beautiful than the plastic ones. Nice work ! It is a real pleasure to watch your videos. Thank you for your work. Good day.



  19. Spock Nimoi on February 5, 2023 at 4:36 am

    el projecto en 3D lo tienes?



  20. Keupon Destroy on February 5, 2023 at 4:36 am

    Merci beaucoup pour la vidéo



  21. Dion Woodcraft on February 5, 2023 at 4:39 am

    Waoou… Good👍👍👍



  22. Андрей Иванов on February 5, 2023 at 4:39 am

    ДА, сделал. Получилось.
    А нужно ли было над этим заморачиваться?
    Я не буду на это тратить время…



  23. Carlos Pires on February 5, 2023 at 4:40 am

    Muito bom



  24. 5 phút sáng tạo on February 5, 2023 at 4:42 am

    This ruler is really useful when we need it



  25. Rashid Lemonbike on February 5, 2023 at 4:43 am

    Sehr schönes Design in Holz. Muss bei Gelegenheit nachgebaut werden



  26. Азархин Роман on February 5, 2023 at 4:43 am

    Молодец, слов нет. Только таким зажимом в два счета разметку на линейке сотрёшь. Тем более на китайской линейке.



  27. Kir Fio on February 5, 2023 at 4:44 am

    Конечно дерево! Молодец!



  28. dmk predator on February 5, 2023 at 4:44 am

    10:30 Так насиловать не обязательно – шайба с гайкой и все само плавно втянется



  29. Jens Kums on February 5, 2023 at 4:44 am

    Na Holz natürlich 👍👍👍



  30. Etienne Bester on February 5, 2023 at 4:45 am

    WOOD!!! Good job sir.



  31. reneboh on February 5, 2023 at 4:46 am

    nice work



  32. Celinda Cajjaj C on February 5, 2023 at 4:49 am

    Wuaoo….
    Excelente idea muy útil
    Gracias por compartirla
    👍👍👍👍
    Felicidades
    Saludos bendiciones Perú



  33. jose Garcia on February 5, 2023 at 4:50 am

    i love your videos, but you never did a Jack Plane or kerfing plane….japanese … i hope you will do soon



  34. Si vis pacem, para bellum on February 5, 2023 at 4:50 am

    en alu



  35. Анатолий Емельянов on February 5, 2023 at 4:51 am

    Класс,толково!



  36. mehmet faruk on February 5, 2023 at 4:54 am

    Güzel çalışma.
    Hazır alacak biri için plastik olan tercih edilebilir. Ama kendi yaptığınız ahşap size taha iyi keyif veriri.



  37. Norbert GALLICE on February 5, 2023 at 4:57 am

    Très belle vidéo et très utile ce marqueur, bravo👏👏👍…C’est celui en bois que je préfère, bien sûr….😉👍….Norbert ( France )



  38. Semiha Ozkan on February 5, 2023 at 4:59 am

    Tres bien



  39. Scott Mattes on February 5, 2023 at 5:01 am

    Suggestion: put the clip of using the thing at the front of the video.



  40. Сергей Панкратов on February 5, 2023 at 5:02 am

    Спасибо за подсказку пойду сделаю из кусочка ламината



  41. Andy Farmer on February 5, 2023 at 5:03 am

    Wood. Great project.



  42. Patrick Wriesnig on February 5, 2023 at 5:05 am

    👌👍👌👍👌👍



  43. FixIT 256 on February 5, 2023 at 5:06 am

    Wait, the free plan included in the video? I`m a new subscriber but this is more than I expected, THANKS A LOT!.



  44. Laércio Ferreira on February 5, 2023 at 5:07 am

    muito bom



  45. denthefirst on February 5, 2023 at 5:10 am

    Inaccurate



  46. Сергей Панкратов on February 5, 2023 at 5:13 am

    А как вы делали ленточку может поделитесь



  47. Manfred Lebenskünstler on February 5, 2023 at 5:16 am

    Danke für das Zeigen. Natürlich ist die Holzvariante schöner.



  48. Mario Paestum on February 5, 2023 at 5:18 am

    sehr schön, gefällt mir wesentlich besser als Plastik, Holz ist viel angenehmer.



  49. Ferndalien on February 5, 2023 at 5:18 am

    Just a variation on the combination square.



  50. Niko_malkom on February 5, 2023 at 5:19 am

    Eyy dude, is a great proyect, do you have the 3d file? i want print this thing