50 Comments

  1. Lohi Karhu on March 1, 2023 at 6:06 am

    and he still has all his fingers!



  2. Ricardo Riera on March 1, 2023 at 6:06 am

    Para mí este muchacho toca de oído esa puerta no va a durar nada el primer portazo se caen todas las maderistas al piso lustro con las bisagras puestas dejo cola entremedio de las maderistas cómo se está perdiendo el oficio hay gente que por este medio enseña y hay gente que embrutece que lástima con lo lindo que es mí oficio me lo están degenerando y no es por necesidad de plata si fuese por eso se esfoerzarian en aprender el oficio realmente como es para perdurar en el tiempo y poder vivir de el de esta forma no generan clientes por qué no los recomiendan



  3. TheLazy Ninja on March 1, 2023 at 6:07 am

    Misleading title



  4. M B on March 1, 2023 at 6:08 am

    Did I miss the smart part?



  5. John Robinson on March 1, 2023 at 6:09 am

    This video should be removed from youtube; it demonstrates the most dangerous use of a table saw I have seen on any woodworking channel. Experienced woodworkers realize how dangerous these procedures shown in this video are but newcomers to woodworking may well think this is a safe and proper way to cut timber on a table saw. Timber must never be sawn on a table saw without using a fence to guide the timber; passing timber through a spinning sawblade freehand is a disaster waiting to happen and believe me, it will happen. Also not using a blade guard or splitter is equally as dangerous. Anyone new to woodworking, Please disregard the techniques used in this video and search for other videos on this subject that show safe and proper methods of using woodworking equipment.



  6. Jack None on March 1, 2023 at 6:10 am

    Always trust woodworking tips from a guy with….ehhhhh…almost all his fingers.



  7. mike elseworth on March 1, 2023 at 6:10 am

    No tips nor tricks. I fell for the title and gave it 5 mins but had to quit. Shame.



  8. brad snedeker on March 1, 2023 at 6:12 am

    It’s amazing with all the content controls that youtube has to censor it’s content that this kind of dangerous crap is allowed as an INSTRUCTIONAL video.



  9. Chad Breton on March 1, 2023 at 6:12 am

    This is hilarious! I won’t pick apart what he’s doing but I will say that I would not do a single thing the way he did it. Especially how he just glued those slats in and expects them to stay. The whole video is a joke



  10. Sin Sinsss on March 1, 2023 at 6:17 am

    Kae lho malay gawe berita penindasan Israel….



  11. Laura Parker on March 1, 2023 at 6:17 am

    Woodworking Dumb.
    NOTHING to learn here except disregard for basic safety practices in woodworking.



  12. Виталий Измайлов on March 1, 2023 at 6:19 am

    Класс!



  13. Drawde1Joints1Sneek on March 1, 2023 at 6:20 am

    stupid guy doing woodwork



  14. Bergen Broodryk on March 1, 2023 at 6:21 am

    Simple But Extremely Effective Tips for Trimming OFF Unwanted Finger Tips.



  15. jorgenio11 on March 1, 2023 at 6:21 am

    that’s why he’s missing pieces of fingers



  16. Hermel Ramírez Bayona on March 1, 2023 at 6:21 am

    Está muy bueno…pero pregunto..ví que le echó colbón al canto de los dos largueros, por parejo, osea q entre los espacios de las tablitas también quedó untado…¿Se lo quitó o lo dejo así? Pues si lo deja así, no sería un buen acabado.



  17. Mitchell Chua on March 1, 2023 at 6:25 am

    just a matter of time before you lose your fingers, not if, but when…



  18. Quiet Intrusion on March 1, 2023 at 6:27 am

    Tips and tricks from a guy that’s cut off the end of 4 fingers. Nah, thanks though.



  19. Gascho Gaschinski on March 1, 2023 at 6:29 am

    NO



  20. JimboJet737 on March 1, 2023 at 6:29 am

    Rough as a badgers arse.



  21. Ass_Burgers_Syndrome on March 1, 2023 at 6:30 am

    The only tips i was focusing on were the tips of his fingers, wondering if he was gonna lose them.



  22. Dieter Mönk on March 1, 2023 at 6:32 am

    Horrible. You should delete this video!



  23. Mar Gon on March 1, 2023 at 6:33 am

    Not bad.. Nice project



  24. Sin Sinsss on March 1, 2023 at 6:34 am

    Nek koe mikir menang terus yo urip dewe.



  25. Champ on March 1, 2023 at 6:35 am

    100% wouldn’t but this cheap sh!t. Worst “craftsmanship” I’ve ever seen… including high school shop class.



  26. AJ on March 1, 2023 at 6:35 am

    Definitely not OSHA approved.



  27. גולן שריקי on March 1, 2023 at 6:36 am

    This is terrible.



  28. Andrei Nik on March 1, 2023 at 6:38 am

    Sucks. The cabinet looks more like a bank safe. The non-ferrous metal handle was screwed onto BLACK screws. The light wood cabinet itself is assembled with BLACK screws. But when I assembled the door, I put bright screws in the hidden holes (you can’t see it there anyway). The middle shelf – you can see how the screw got out in the far right corner. Dislike.



  29. Виталий Измайлов on March 1, 2023 at 6:38 am

    Вопрос только в том, как шлифовать клей?)



  30. Gaspar Sousa on March 1, 2023 at 6:40 am

    Trabalho de amador.



  31. Ksysha LaSexi on March 1, 2023 at 6:41 am

    Seriously!? I twisted the handle with black screws on the facade, is it really impossible to find a ball to match the color??? And when the product was painted with varnish, why did I put the hinges, the varnish kills the lubricant inside the mechanism and worsens their work, over time!? Well, who cares, after buying the product, at least it will burn with fire… Not well done and without a soul…



  32. LCM massa on March 1, 2023 at 6:41 am

    Nice piece!
    Hes right about the fingers. Safety please. Teeth and fingers are nice to have.



  33. Therri Vieira Therri on March 1, 2023 at 6:42 am

    Parabéns amigo ótimo trabalho.



  34. محبي د. عبد الفتاح أنيس on March 1, 2023 at 6:44 am

    هداك الله شوهت أسم المصلحة كلها ليس هكذا يصنع الباب



  35. Martyn on March 1, 2023 at 6:44 am

    And you are actually proud of that? i can forgive to peer quality work but the lack of health and safety is unforgiveable. its you employers fault he obviously doesnt care



  36. Sin Sinsss on March 1, 2023 at 6:44 am

    Lha koe ngurusi aku lapo ngurusi malay enak to kebenarane piye



  37. Kevin Chamberlain on March 1, 2023 at 6:45 am

    Rough as fuck.



  38. perlnut on March 1, 2023 at 6:47 am

    Great video … on "HOW NOT to build a cabinet", or "NEED TO REMOVE a finger, what this".

    Video should be retitled "Simple and Extremely Ineffective Tips and Tricks in Woodworking Everyone Should Avoid".

    Didn’t see any tips or tricks.

    I bet if you took 100 slat doors made at that shop, you couldn’t find TWO that were identical.Seems everything was just eyeballed as they were built. Just poor craftsmanship all around – oops, by bad, there wasn’t any craftsmanship to be found.

    There’s 15 minutes I’ll never get back.



  39. Simone Longobardi on March 1, 2023 at 6:48 am

    Not sure if i am more scared of the lack of safety or the monster spider on the wall at 13:02



  40. Kevin CinnamonToast on March 1, 2023 at 6:49 am

    Superior craftsmanship. Joking



  41. roberto mayorico on March 1, 2023 at 6:50 am

    they removed the riving knife, fence and guard from the cabinet saw, dust collection does not exist. standing behind a piece of lumber while it is being milled is xtremely dangerous. kickback can kill you. kickback is very likely to happen when the riving knife is removed etc etc.. this is so wrong on so many levels. hands should be a minimum of 10 cm away from sawblade. this would be illegal in germany. somebody could imitate it and loose his fingers. you also should not glue end grain to long grain, even screws dont give enough stability. he should have used dowels instead of screws. the slats will probably fall off one after the other.



  42. Jean Strong on March 1, 2023 at 6:52 am

    What tips and tricks?



  43. Jorge Paredes on March 1, 2023 at 6:54 am

    Pesimo trabajo. No durará .



  44. Mitchell Carl on March 1, 2023 at 6:54 am

    Wow… so many things done wrong. Maybe you would find this type of product in Walmart. How many fingers can be found strewn around the shop? Glue squeeze-out not cleaned up? I’m sure those slats fall loose in no time. Do the job right, or don’t waste your time. Fun to watch. I was just waiting for the table saw to give the guy a kickback gut punch.



  45. Enrique Gozalbo Alfaro on March 1, 2023 at 6:56 am

    Nnnnn.



  46. LucaSpeed on March 1, 2023 at 6:57 am

    I don’t like woodwork done in a hurry without any care about precision and details. And please use protections on your machinery unless you want someone to feed you for the rest of your life



  47. Aulas de marcenaria on March 1, 2023 at 6:59 am

    Devia ter parafusado as paletas



  48. Gregory Nickoloff on March 1, 2023 at 6:59 am

    This is crazy… the guy does everything wrong!



  49. SideKick Studios on March 1, 2023 at 7:00 am

    That nail trick is actually kind of clever, but everything else is just.. oof.. Safety apparently isn’t a thing, and those slats/louvres would fall out in a year max in any climate, that has temperature changes, since wood contracts and expands. You should spray the wood before you apply hardware.



  50. Alejandro Rojas on March 1, 2023 at 7:05 am

    El peor trabajo que he visto . las tablillas tienen que ir encastradas no pegadas eso es deshonestidad profesional es teabajo de vago. 30 años de carpintería me respaldan