See that chip fly? This will soon be the one eyed Irish guy. Will glue a cap to his head but never wear safety glasses.
ЯRon June 19, 2023 at 12:59 pm
Rumor has it his father is a leprechaun.
Johnathon Olavarriaon June 19, 2023 at 1:02 pm
If anyone ever asks why hand made stuff is so much money send them to his channel.
BPon June 19, 2023 at 1:03 pm
saw
Robin Tayloron June 19, 2023 at 1:05 pm
I got a old spirit level if you want it I would like it to go to someone who would use it if you want it let me know and you can have it posted to you I’d like to see you do a video on it and then you can keep it no good to me but I’m sure you would put it to good use. It’s made of red wood and it’s got brass on it by the level bubbles
CrosswindSurferon June 19, 2023 at 1:05 pm
The algorithm gods brought me Eoin. Praise the RITHM!!!!
That Banana Ponyon June 19, 2023 at 1:09 pm
Really would pay to see a joint show with him and nick Offerman
Jimmy Lon June 19, 2023 at 1:09 pm
I don’t really care what you cut at this point I just like how passionate you are doing what you do😁
ma booooy leatherface.on June 19, 2023 at 1:10 pm
I love how agressive this guy is woth the draeing knife he broke the handle the camera was shaking i wouldn’t be surprised if he could fell a tree with one stroke of the drawing knife.
meyhem makeron June 19, 2023 at 1:11 pm
That was a poor design for the handles of that draw knife-you think it’d support it in the direction you pull so the handles don’t come off like that –
ToadSkullon June 19, 2023 at 1:11 pm
this man is jackscepticeye in a different universe
Catherine Lyonson June 19, 2023 at 1:11 pm
He is from clare
Mary Mcdonaghon June 19, 2023 at 1:11 pm
Hmm?🤔 after reading some of the comments??🤔 II wonder are people really interested in tutorial,s on how to make a handle for a hammer? Or is it you they like to watch MAKING THEM???! 🤗🤒😍🥰 ♥️ 😁
Brett Sheridanon June 19, 2023 at 1:13 pm
Eoin, I thoroughly enjoy your content. As I am becoming a voice actor, you are my reference for your beautiful Irish Accent, but I have learned so much about wood working from you as well. So a giant thank you from Canada!
Bubba Smithon June 19, 2023 at 1:14 pm
A little trick: to reduce tear out when planing reversing grain, close the throat. A thin piece of cardboard will do
Mary Presleyon June 19, 2023 at 1:16 pm
How is how to make a bent will chair it’s a good project for beginners
Brian Costelloon June 19, 2023 at 1:19 pm
Súgán chairs were once a familiar sight all over Ireland and beyond; the wooden frame, made from a variety of woods but most commonly ash or larch, joined with mortice and tenon joints, is held together with a sturdy woven seat of ‘súgán’, the Irish word for straw or hemp rope.
LilTroll0110on June 19, 2023 at 1:21 pm
I love your videos keep it up
Steven Smithon June 19, 2023 at 1:21 pm
The real kicker would be that he is using a mechanical planer during scene 🎬 cuts. 😂
Cholula Hot Sauceon June 19, 2023 at 1:22 pm
Eoin do you ever watch Peter Follansbee?
Alex Murrayon June 19, 2023 at 1:22 pm
What year is this ??
Eddy Duttonon June 19, 2023 at 1:23 pm
Where do you get the ash wood from?
Shitstirreron June 19, 2023 at 1:23 pm
finally! something that’s not another handle.
Xacharu Griswoldon June 19, 2023 at 1:24 pm
Real deal ,dude I watch as much as I can of your shorts and whatnot. You really are a f****** cool guy a rare breed my good man. And oh yeah, your good practice and habit of wd-40.…. I got to get out of here before you think I’m just talkin blowing smoke but I’m like whaaaatttttttt
The Pop cat Gameron June 19, 2023 at 1:26 pm
ash man
Ethan Delpon June 19, 2023 at 1:29 pm
This mam is a treasure to the world.
Jeremiah Wattson June 19, 2023 at 1:30 pm
It’s not hard to imagine this guy and Ron Swanson meeting, having a glass of whiskey, and trading tips on woodworking.
Terrance Milleron June 19, 2023 at 1:33 pm
Oh how nice, stiff piece of ash.
Christian Boechleron June 19, 2023 at 1:34 pm
Your draw knives hate you
Dillweedzon June 19, 2023 at 1:34 pm
My damn handle pops off my pull blade too lmao
Emily Normanon June 19, 2023 at 1:36 pm
Please wear eye protection when you do that.
P47on June 19, 2023 at 1:37 pm
I was taught to never put the sole of a plane flat on the bench.
craigathonianon June 19, 2023 at 1:37 pm
Great example of how to make queer ..straight !
308 Avengeron June 19, 2023 at 1:38 pm
Hahahaha I was legit about to ask how you keep your handles on the draw knife, then off she came hahahah.
Stephen Edwardson June 19, 2023 at 1:39 pm
And then catch the Number 6 bus and Fuck off 😂😂😊
ArnieMcStrangleholdon June 19, 2023 at 1:40 pm
I’ll probably find out as I go through your videos, but do you do stuff with mahogany? I’ve picked up some baby trees, and I intend to turn one of them into a table. The time it takes to grow, I have plenty of time to learn and fail a few projects.
Nathanielon June 19, 2023 at 1:40 pm
Very informal thanks
Grant Hagenon June 19, 2023 at 1:45 pm
Why use the Five and then the Seven? Aren’t both configured to slice paper thin? If that is the case, why use one over the other? Or am I missing something? Great stuff for sure, but I’m just a little confused about the process
Josh Crupeon June 19, 2023 at 1:47 pm
Not a slant or complaint but it seems you only use ash is there a reason for that ?
phil18751on June 19, 2023 at 1:47 pm
Did that square with a short axe… Nice
Jason Drakeon June 19, 2023 at 1:47 pm
Turning 3 minutes of jointer work into hours of fun.
Zaysahon June 19, 2023 at 1:49 pm
Can I come work for you?
Germ Crazyon June 19, 2023 at 1:50 pm
I’m being serious when I ask how you ever finish a project doing everything by hand?! I use all the power tools I can and it still seems like I get nothing done! Amazing.
charles mccallisteron June 19, 2023 at 1:51 pm
Thats a lot of work for one square stick. A lot of different tools.
Arnold Chanon June 19, 2023 at 1:52 pm
Last real man on earth.
boo byeon June 19, 2023 at 1:52 pm
guy did all that manual labour with hand tools! and not even out of breath or sweating… suspicious
Rusty Shaklefordon June 19, 2023 at 1:53 pm
I use a grinder and a flap disk 😂
Tony Rizzoon June 19, 2023 at 1:55 pm
Of course the tanks saw is soooo much easier
blubyuon June 19, 2023 at 1:55 pm
So glad I found your channel! I love the Irish accent. It’s so light and airy sounding! Very relaxing to watch and listen too. You are such a nice young man. God bless you!😊
See that chip fly? This will soon be the one eyed Irish guy. Will glue a cap to his head but never wear safety glasses.
Rumor has it his father is a leprechaun.
If anyone ever asks why hand made stuff is so much money send them to his channel.
saw
I got a old spirit level if you want it I would like it to go to someone who would use it if you want it let me know and you can have it posted to you I’d like to see you do a video on it and then you can keep it no good to me but I’m sure you would put it to good use. It’s made of red wood and it’s got brass on it by the level bubbles
The algorithm gods brought me Eoin. Praise the RITHM!!!!
Really would pay to see a joint show with him and nick Offerman
I don’t really care what you cut at this point I just like how passionate you are doing what you do😁
I love how agressive this guy is woth the draeing knife he broke the handle the camera was shaking i wouldn’t be surprised if he could fell a tree with one stroke of the drawing knife.
That was a poor design for the handles of that draw knife-you think it’d support it in the direction you pull so the handles don’t come off like that –
this man is jackscepticeye in a different universe
He is from clare
Hmm?🤔 after reading some of the comments??🤔 II wonder are people really interested in tutorial,s on how to make a handle for a hammer? Or is it you they like to watch MAKING THEM???! 🤗🤒😍🥰 ♥️ 😁
Eoin, I thoroughly enjoy your content. As I am becoming a voice actor, you are my reference for your beautiful Irish Accent, but I have learned so much about wood working from you as well. So a giant thank you from Canada!
A little trick: to reduce tear out when planing reversing grain, close the throat. A thin piece of cardboard will do
How is how to make a bent will chair it’s a good project for beginners
Súgán chairs were once a familiar sight all over Ireland and beyond; the wooden frame, made from a variety of woods but most commonly ash or larch, joined with mortice and tenon joints, is held together with a sturdy woven seat of ‘súgán’, the Irish word for straw or hemp rope.
I love your videos keep it up
The real kicker would be that he is using a mechanical planer during scene 🎬 cuts. 😂
Eoin do you ever watch Peter Follansbee?
What year is this ??
Where do you get the ash wood from?
finally! something that’s not another handle.
Real deal ,dude I watch as much as I can of your shorts and whatnot. You really are a f****** cool guy a rare breed my good man. And oh yeah, your good practice and habit of wd-40.…. I got to get out of here before you think I’m just talkin blowing smoke but I’m like whaaaatttttttt
ash man
This mam is a treasure to the world.
It’s not hard to imagine this guy and Ron Swanson meeting, having a glass of whiskey, and trading tips on woodworking.
Oh how nice, stiff piece of ash.
Your draw knives hate you
My damn handle pops off my pull blade too lmao
Please wear eye protection when you do that.
I was taught to never put the sole of a plane flat on the bench.
Great example of how to make queer ..straight !
Hahahaha I was legit about to ask how you keep your handles on the draw knife, then off she came hahahah.
And then catch the Number 6 bus and Fuck off 😂😂😊
I’ll probably find out as I go through your videos, but do you do stuff with mahogany? I’ve picked up some baby trees, and I intend to turn one of them into a table. The time it takes to grow, I have plenty of time to learn and fail a few projects.
Very informal thanks
Why use the Five and then the Seven? Aren’t both configured to slice paper thin? If that is the case, why use one over the other? Or am I missing something? Great stuff for sure, but I’m just a little confused about the process
Not a slant or complaint but it seems you only use ash is there a reason for that ?
Did that square with a short axe… Nice
Turning 3 minutes of jointer work into hours of fun.
Can I come work for you?
I’m being serious when I ask how you ever finish a project doing everything by hand?! I use all the power tools I can and it still seems like I get nothing done! Amazing.
Thats a lot of work for one square stick. A lot of different tools.
Last real man on earth.
guy did all that manual labour with hand tools! and not even out of breath or sweating… suspicious
I use a grinder and a flap disk 😂
Of course the tanks saw is soooo much easier
So glad I found your channel! I love the Irish accent. It’s so light and airy sounding! Very relaxing to watch and listen too. You are such a nice young man. God bless you!😊
🇮🇪🇮🇪🇮🇪