Table Saw extension wing Router Table

Table Saw extension wing Router Table

I have a few projects coming up that would benefit from having a router table. But, like most of us, I’m a bit short on shop space, so I made a router table in my table saw extension wing.

—————————————————————————————————————-

Products (Amazon affiliate links):
Router Plate: https://amzn.to/2KEf3v9
Router w/ fixed base: https://amzn.to/2IUWTYU
Titebond 3: https://amzn.to/2rTOgDb
Glu-bot: https://amzn.to/2IvvWHG
Bench dogs glue brush: https://amzn.to/2Iu5nXx

—————————————————————————————————————-

How to contact me:

Instagram: https://www.instagram.com/dabneywoodworks/
Twitter: https://www.twitter.com/dabneywoodworks/
Email: contact@dabneywoodworks.com

—————————————————————————————————————-

Music Credits:

Ice Cold by Audionautix is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/)
Artist: http://audionautix.com/

Not For Nothing by Otis McDonald

Cielo by Huma-Huma

Pilots Of Stone by Audionautix is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/)
Artist: http://audionautix.com/

50 Comments

  1. TJ Ward Handy-Remodeler on August 27, 2022 at 12:49 am

    Freaky Fast! Noce job!



  2. Troy Battle on August 27, 2022 at 12:50 am

    Thank you for this video. I’ve been trying to decide what to do for my router table and this is perfect.



  3. SatansSpatula on August 27, 2022 at 12:51 am

    At 8:40, you use a hex wrench to raise and lower the router bit. How does that work?! I don’t see any lift function in the description of the Russeau 3509 router plate!



  4. Living Like Von on August 27, 2022 at 12:52 am

    Good job broski . Here’s a lil tip anytime u have trouble leveling something flush with a surface like that router top put some hot glue in the rabbeted / lip area , the. Place the top on it and clamp a level to the top and bottom 💯



  5. K G on August 27, 2022 at 12:53 am

    Nice job. No b/s and great music.



  6. Christ Julius on August 27, 2022 at 12:53 am

    I’m pretty sure the best instruction is on woodprix.



  7. chasees chasers on August 27, 2022 at 12:56 am

    before you start another project get with that pile of dirty laundry your standing in that shit is a trip hazard



  8. Reginald Gabel on August 27, 2022 at 12:56 am

    Awesome brother…..



  9. Malvisk on August 27, 2022 at 12:57 am

    Adding this to my delta this weekend!



  10. Paul Sigmon on August 27, 2022 at 12:57 am

    Nice!



  11. Specter RN on August 27, 2022 at 12:58 am

    Very nice!



  12. Tim List on August 27, 2022 at 12:58 am

    Was that a lift in the router faceplate or is that a function of your router? Looks like a very useful modification. Well Done!



  13. Todd Mitchell on August 27, 2022 at 1:01 am

    I have 3/4 inch melamine boards for both of my current extension wings. Do you feel that would be thick enough to support this method? Thx! Great video.



  14. Timadin on August 27, 2022 at 1:03 am

    What is the tool you use @8:41 to adjust the height of the router bit when it is in your table?



  15. Robert vz9 on August 27, 2022 at 1:04 am

    Hi what kind of molding cutter you have used with the machine to make the edges .thanks



  16. Tony Addy on August 27, 2022 at 1:04 am

    Love this Man!! got to investigate how I am going to mount it the my saw different brand older Ridgid 3650T



  17. Tiger800 XCx on August 27, 2022 at 1:04 am

    Heyyyy I like that glue dispenser at 1:11 !



  18. only1jman on August 27, 2022 at 1:05 am

    I really like what you did. Great video and great work.



  19. Wolf Pack on August 27, 2022 at 1:05 am

    well here i go… building one for myself … thanks for video… nice job



  20. Woody Willis on August 27, 2022 at 1:05 am

    Good job. Enjoyed the video.



  21. Matthew S on August 27, 2022 at 1:07 am

    Gotta say that time lapse videos usually lose me, but this was cool. I subbed.



  22. Dennis Smith on August 27, 2022 at 1:08 am

    Was all the hardware you used included with the router insert plate? I plan on doing the same think to me saw. This was a huge help



  23. Scott White on August 27, 2022 at 1:09 am

    I’m with Matthew S. I normally cant get through a whole time lapsed video but this one was edited well. I think the excellent music choices helped too.



  24. Anthony Hitchings on August 27, 2022 at 1:09 am

    nicely done, both the project and the video



  25. Nick Fritz on August 27, 2022 at 1:10 am

    Love the flip flops! 🙂 Is that a adjustable height plate and who makes it?



  26. Coleman on August 27, 2022 at 1:11 am

    Did you use 3/4” or 1/2” MDF? I doubled two 3/4” boards together, but the 1 1/2” partially or completely covers the holes in the rails making it impossible to adjust the height when it comes time to attach the extension since you’d just be screwing into the table itself instead of using a bolt and nut through the frame. I must be missing a minor detail.



  27. avidarcher on August 27, 2022 at 1:13 am

    Nice. Way more affordable than the saw stop extension.



  28. james kolbe on August 27, 2022 at 1:14 am

    I turned the music off, it was annoying. Also you are not in a race, slow down!



  29. Jim Doss on August 27, 2022 at 1:14 am

    Not bad!



  30. Scott Allen on August 27, 2022 at 1:15 am

    I like this idea! What a space saver.



  31. doulos on August 27, 2022 at 1:15 am

    Leave it to a black man to be able to saw to the beat ! 😂



  32. MadMonk67 on August 27, 2022 at 1:16 am

    Very nice. You’re making me want to build one for myself.



  33. Dan Seven on August 27, 2022 at 1:16 am

    Good Job !



  34. John Short on August 27, 2022 at 1:17 am

    Nice, neat and inexpensive, good job.



  35. cheek1m0nkey on August 27, 2022 at 1:17 am

    Thanks for the video, and it looks good, but I can tell you that you’re going to have a serious sag in that table at some point in the next few years. With additional supports, you might be able to slow the process, but it will be difficult to completely prevent sagging given the materials used.



  36. dddddmorgan on August 27, 2022 at 1:17 am

    I’m enjoying your work. The videos are good but I’d like it if you could pause and explain some details. It’s refreshing to find someone doing "regular" projects with practical applications that aren’t sponsored by Rockler.
    Question: Do you think it’s sufficient to attach to the fence rails or should you try to anchor to the table saw as well? I’m thinking long term rigidity.

    I’d like to be neighbors 😉



  37. Michael Brinkley on August 27, 2022 at 1:20 am

    This may be a dumb question, but did you buy all of the hardware, such as the router plate and sides, because I would like their information as to who you bout it from?



  38. desviz on August 27, 2022 at 1:26 am

    Sir: it looks like this Bosch router can be adjusted vertically with a wrench? did i see that right? So the router can just stay in the table and you can do your bit replacements and height adjustment, all at the table? thank you for the great video!



  39. Call of Duty King on August 27, 2022 at 1:26 am

    Кто пришлёт мне такое?



  40. Brian Epperson on August 27, 2022 at 1:27 am

    That’s a nice build Dude… Nice quality



  41. Jason’s Odyssey on August 27, 2022 at 1:28 am

    Subscribed. Badass video boss. Keep them coming!



  42. Matt Ruz on August 27, 2022 at 1:29 am

    Good Job! Liked the video.



  43. Donald Johnson on August 27, 2022 at 1:30 am

    I wish you would have covered how you set up the fence.



  44. Anthony Hitchings on August 27, 2022 at 1:30 am

    you never gave us a full overview shot in the video, we got a teaser shot at the end, that too-quickly faded out



  45. tkdub on August 27, 2022 at 1:35 am

    Great work! How is the router table holding up so far?



  46. conjering on August 27, 2022 at 1:36 am

    THat was bad ass.



  47. Justin McEdward on August 27, 2022 at 1:40 am

    Love the soundtrack. Great music choices – the video was also super helpful.



  48. jeff jones on August 27, 2022 at 1:40 am

    Very nice.



  49. LarryT1948 on August 27, 2022 at 1:44 am

    Just stumbled onto your video. Good job! Enjoyed the music and the video. The subject was right on point for me. You have a new subscriber!



  50. Sue B on August 27, 2022 at 1:45 am

    Hi, so now it’s been a couple of years since your router table install. Do you feel that the weight of the mdf plus the hanging router has created any sag on the fence guide rails of the table saw?