THE SECRET of the Old Masters of CARPENTRY | Woodworking Tricks and Tips for Beginners

THE SECRET of the Old Masters of CARPENTRY | Woodworking Tricks and Tips for Beginners

THE SECRET of the Old Masters of CARPENTRY | Woodworking Tricks and Tips for Beginners

✅✅ Make 16,000 Projects With Step By Step Plans …even if you don’t have a large workshop or expensive tools!
➡️ Get instant access to 16,000 projects now https://bit.ly/16000Plans-Projects

✅✅ How to launch your own Woodworking Business for under $1000 and Make until $150,000 a yers.
➡️Step-by-step guide https://bit.ly/woodprofits-joineryforbeginners

Our channel intends to always bring the best content on carpentry for beginners, in addition to handcrafted ideas. We do our best to always have new videos weekly. To not miss any news, subscribe to our channel, activate the bell for all notifications.

link: https://youtu.be/H50tTNz2nPU

Follow our profile on Instagram: https: //www.instagram.com/canal_willw …

__________________________________________________________________

Keywords for Search:

woodworking projects, woodworking projects for beginners, Juntas de madeira, marcenaria para iniciantes, willwood,canal willwood, tips and tricks, marcenaria, dicas de marcenaria, tips woodwork, tips woodworking, shop tips woodworking, woodworking tips tricks and secrets, craft ideas, diy wood projects, wood projects, wood joint, wood joints, wood joints techniques

#diyprojects #woodjoint #woodworkingforbeginners

50 Comments

  1. James T Kirk on December 10, 2022 at 12:24 am

    Starts cut on camera will dull ass saw. Finishes off camera with mitre saw. Hand tool wood working y’all!



  2. George Shepherd on December 10, 2022 at 12:26 am

    Absolutely brilliant
    work



  3. Hawken Man .54 on December 10, 2022 at 12:27 am

    I realize a lot of people will comment negatively about such things as technic but I think the video is really about showing the potential for using dowels to make a simple 45 joint very strong. I enjoyed the video and the concept. Thank you Sir.



  4. Skd Skd on December 10, 2022 at 12:27 am

    You can add some more glue 🙄😂



  5. david hunt on December 10, 2022 at 12:29 am

    The idea is good but the application could be better.



  6. Justin Maynard on December 10, 2022 at 12:33 am

    Fraud. Not good. Can’t measure square across



  7. Follow Me on December 10, 2022 at 12:33 am

    This is a nice video and good techniques – except it looks like a lot of glue got stripped away and didn’t make it into the hole. I think it’d be better to swab some glue into those holes with a toothpick or a straw before the dowel.



  8. Tryst Dodge on December 10, 2022 at 12:34 am

    I just heard about this thing called a nail. Can I offer you a box?



  9. Nivek Nospmoht on December 10, 2022 at 12:34 am

    Dowels should have been run through a pair of vice grips first to groove them out for better glue retention instead of scraping it off at the beginning of the hole



  10. K M on December 10, 2022 at 12:34 am

    Look at all the tear out on that would be unacceptable for me.



  11. Mike Marks on December 10, 2022 at 12:36 am

    The hand saw "work"….very bad burn you left on that wood stud. Lol.



  12. Danny bryant on December 10, 2022 at 12:36 am

    Loved this video!!! Beautiful wood as well, what type are the boards?



  13. Far North on December 10, 2022 at 12:38 am

    Not how I would have done it….



  14. Mark Purcell on December 10, 2022 at 12:39 am

    Oh my god the blowout from that drill. Which hack job then remains entirely visible in the finished product. Why are you giving tips to beginners??



  15. Cliffy 001 on December 10, 2022 at 12:40 am

    Interesting, but dovetails any day



  16. Dan Oesterman on December 10, 2022 at 12:40 am

    Why no glue in the holes before driving in the dowels?



  17. telosfd on December 10, 2022 at 12:42 am

    Hand saw seems not working properly.



  18. Doug Tilaran on December 10, 2022 at 12:42 am

    SOOO. How ya gonna fix that mess the drill bit made because of using your "45 jig" and not a proper one ? Hack.



  19. Patricia Soares on December 10, 2022 at 12:44 am

    Sensacional! Gratidão 🌈🤗.



  20. steven Limbach on December 10, 2022 at 12:45 am

    No way you actually cut that miter with the dull saw ! Joint does look nice when done however.



  21. 275jesuss on December 10, 2022 at 12:48 am

    I saw trimmer processing on the ceiling for the first time,
    I could see the goodness of the indirect lighting. Have a nice day.



  22. hmkorten on December 10, 2022 at 12:49 am

    Abgesehen von den stumpfen Sägen und den Ausrissen an den Bohrlöchern sehr schön! 😉



  23. eddie moon on December 10, 2022 at 12:51 am

    Don’t like the tear out. But I like the design, tho!!



  24. Hey Boomer on December 10, 2022 at 12:52 am

    Before closing the mitered ends together, I apply tape over the tops of the miter so that the two parts are held close together as I close the joint.



  25. Boy Wonder on December 10, 2022 at 12:52 am

    That saw was as blunt as a cricket bat I could have ridden to London on it.



  26. Wes Baumguardner on December 10, 2022 at 1:01 am

    Finish nails would be a lot less obvious and less work while also being stronger. Just saying.



  27. nicholas schrader on December 10, 2022 at 1:02 am

    Videos where no one speaks and narrates whats happening and giving tips along the say are stupid. Why would you make a video that your not in it and not speaking? its just dumb



  28. Dan Menard on December 10, 2022 at 1:02 am

    Pro tip….buy a chop saw….



  29. Imtheone VanHalen on December 10, 2022 at 1:02 am

    The bored holes HAVE to be soaked with glue, otherwise this is a nothing video. Dowels coated into coated holes makes perfect sense.



  30. Kenn Kid on December 10, 2022 at 1:04 am

    two dowels is enuf.



  31. Wood working skil on December 10, 2022 at 1:06 am

    Skil yang luar biasa,,, sukses selalu kawan👍



  32. Dan Oesterman on December 10, 2022 at 1:07 am

    I’ve never seen this used in old furniture or building. What old craftsmen do this? I know I will try this.



  33. WillWood - Diy & woodworking on December 10, 2022 at 1:08 am

    ✅✅ Curso Marcenaria para Iniciantes em Casa: 100% Vídeos Aulas.
    Com aulas divididas em módulos para facilitar seu aprendizado!
    Descubra como Ganhar DINHEIRO em casa!
    ➡➡ https://go.hotmart.com/J74247773U



  34. Sir Whistler Bhagwan on December 10, 2022 at 1:08 am

    Beautiful



  35. HowToDoItDude on December 10, 2022 at 1:09 am

    I would never do this, but it was fun to watch.



  36. J Green on December 10, 2022 at 1:09 am

    Very good!



  37. Joe Palooka on December 10, 2022 at 1:11 am

    Wow you are a total AMATEUR! The "Secret of the Old Masters Of Carpentry"—- LOL what a total joke! This video is so ridiculous I can’t believe it. The "Old Masters of Carpentry" would laugh you right out of the shop. You need to spend a few years learning how to be a woodworker before making silly videos like this.



  38. ehn.b on December 10, 2022 at 1:11 am

    so for anyone trying to actually use this, here’s some tips:

    use a sharp saw. if you dont have one, leave a little bit of room and use a chisel to get to your line. dull saws will leave tearout at the fine edge of the miter.

    DO NOT handsand the gluing surface of the miter cut. all you’re doing is rounding edges that will produce gaps in the glue joint, and it will not flatten the surface (much more likely to dome the surface). use a rigid block to attach the sandpaper to (make sure it’s truly flat, and be careful around the edges, dont roll over them), or better yet, use some type of straight, edged tool (chisel, plane – go with the grain rather than cutting across it).

    clamp the sacrifice block at the exit of the drilled hole, rather than holding it by hand. this will reduce that awful tearout on the exit hole.

    grooving the dowels can help get glue in the joint, but you can also apply a thin layer of glue to both surfaces (inside of the hole, and the dowel). woodglue doesn’t like gaps, so i’d go for minimally grooved or not at all, personally. putting glue on both glued surfaces should always be done when woodworking, as wood can absorb some of the glue and starve the joint. rather than slathering on one piece, a nice thin layer on both is much better.

    a prettier way to strengthen the joint using dowels is to hide them. you measure and drill the holes on both gluing surfaces of the miter without going thru the wood (so drill the holes in each piece of wood individually, making sure not to go thru the exterior facing surface, rather than gluing them together and then drilling thru the whole corner). glue and hammer in the dowels to one piece, then apply glue to the dowels sticking out, as well as the miter-cut faces, and gently tap the other piece of wood onto the dowels until both pieces of wood are flush. strengthens the joint, and is totally invisible when the piece is done, tho requires more precision and measuring.



  39. Normanek72 on December 10, 2022 at 1:12 am

    Nice.



  40. Mick Sebo on December 10, 2022 at 1:12 am

    What timber is he using?
    I have got some of this and local timber sellers could not identify it



  41. James Coker on December 10, 2022 at 1:13 am

    All you people claiming the hand saw is dull without actually knowing, ever think maybe this is a fine tooth cut saw? Can’t really tell the TPI but a fine tooth cut saw will take a lot longer to complete the cut. Also, am I the only one who thinks he is working with hickory? If you have not ever worked with hickory, I challenge you to pickup a scrap piece and make a cut or notch it with your chisel. Then you’ll understand.



  42. DanPeabody on December 10, 2022 at 1:16 am

    Interesting how a "for beginners" video attracted so many experts willing to share their superior techniques. My bookcase needed a corner tightened. Now I know a better way.



  43. Wally Weener on December 10, 2022 at 1:16 am

    Whats the angle please?



  44. justlovethisgame on December 10, 2022 at 1:16 am

    Very long winded and plenty room for error for a beginner! There are far better methods like splines, very simple for anyone!



  45. Pniko1014 on December 10, 2022 at 1:17 am

    This looks like a time waste compared to dove tail methods. Not to mention a jig to clamp and drill before glue would save time. This looks cool and would strengthen a corner. I do not believe I have seen any old furniture doing this.

    Pretty sure your saw is dull.



  46. Orion 77 on December 10, 2022 at 1:17 am

    I gave the video a THUMBS DOWN. because there are no "secrets" here in the video, and this is nothing that "old masters" would have done. just look at the gaps you left in your joint!! very messy and sloppy work. you have a very long way to go before showing other people "how to" do stuff……



  47. CoaSoft on December 10, 2022 at 1:19 am

    I think you should have driven in two dowells in each joint from opposite directions.
    I don’t know why I feel this way but I do.
    I also can’t beleive you hand cut 45’s in hardwood 2 by’s freehand with no vice. //ji



  48. AZCobraman on December 10, 2022 at 1:20 am

    Didn’t even have to clamp that miter joint… 😄



  49. Patrick Allen on December 10, 2022 at 1:23 am

    Can I interest you in some hold down clamps?



  50. SkiFreee on December 10, 2022 at 1:23 am

    Looks good, but why not just do a dovetail for that level of effort?